You need to park your vehicle next to the dead one. Ideally, the vehicles should be about 18 inches away from one another. Both vehicles need to be turned off. Attach the jumper cables. Make sure that you follow the instructions in the manual because it will tell you how long you need to charge your battery. The next step is to start your vehicle and let it run for a few minutes. Your vehicle may have to run for one or two minutes.
Have the other driver to start their vehicle. If the other vehicle does not turn on, then the driver will need to rev the vehicle. You are now ready to disconnect the cables. If the jump start does not work, then the other driver may need to get their battery replaced. Keep in mind that batteries need to be replaced after four to six years.